- Тype: Active
- Power: 1000 W
- Woofer: 12"
- Tweeter: 1"
EAW RSX129 Active Loudspeaker
The EAW RSX129 is a 12-inch self-powered point-source loudspeaker designed for rental firms and system integrators who need concert-grade output with streamlined setup. Onboard bi-amplified electronics deliver 500 W RMS per band, while EAW's signature Focusing™ and DynO™ DSP keep the impulse response clean from whisper-quiet speech to full-volume music. Integrated Dante™ networking with analog redundancy makes the RSX129 a flexible hub for permanent installs and touring rigs alike.
- Max SPL: 135 dB — enough headroom for live music venues and houses of worship
- Coverage: 90° × 60° rotatable horn — aim the pattern where the audience sits
- Connectivity: Balanced XLR, Dante, RJ45 — analog and networked audio on a single box
- At 30 kg, the cabinet stays manageable for one technician to fly or stage
EAW RSX129 — Self-Powered Point-Source Loudspeaker for Touring and Installation
The EAW RSX129 is a 2-way self-powered loudspeaker engineered for rental firms, system integrators, and live-music venues. A 12-inch low-frequency driver pairs with a 1-inch exit compression driver through EAW's MK-inspired constant-directivity horn, delivering a 90° × 60° rotatable coverage pattern. Onboard bi-amplified electronics push 500 W RMS per band, so this cabinet hits 135 dB max SPL without external racks. This loudspeaker is the right choice for production teams who need a flexible, networkable point-source cabinet that drops straight into a Dante audio infrastructure.
What Sets the RSX129 Apart
EAW's signature Focusing™ and DynO™ DSP live inside the cabinet, correcting the impulse response at every output level so vocals stay intelligible and program material hits with full transient detail. Beamwidth-Matched Crossovers align the LF and HF dispersion patterns across the crossover region, eliminating off-axis lobing. Integrated Dante™ networking with loop-through and analog redundancy lets a single cable carry audio, control, and monitoring data, while the EAWmosaic™ iOS app delivers system prediction and remote tuning from anywhere in the venue.
Technical Specifications — EAW RSX129
Every parameter below is taken from EAW's official documentation and confirmed across multiple retailers, so integrators can spec the RSX129 into a design with confidence.
- Frequency Range: 59 Hz - 20 kHz — full-range response for music and speech without a sub
- Max SPL: 135 dB — headroom for live bands and spoken-word events
- Drivers: 12" LF cone with 3" voice coil + 1" exit HF compression driver — handles vocals, kick drum, and bass guitar with clear highs
- Amplification: Bi-amp (LF/HF), 500 W RMS per band — dedicated power for each driver
- Coverage: 90° H × 60° V, rotatable horn — aim the pattern at the audience
- Inputs: Balanced XLR, Dante, RJ45 — analog and networked audio on one box
Who the EAW RSX129 Is Built For
This loudspeaker suits a wide range of professional audio roles. Houses of worship get clean vocal reproduction and Dante networking for distributed sanctuary systems. Theatres and performing arts centers benefit from the rotatable horn, letting techs aim coverage at raked seating without re-rigging. Live music clubs, corporate AV houses, and regional rental firms deploy the RSX129 as mains or fill, while dry-hire customers appreciate Dante loop-through that simplifies multi-cabinet cabling. EAWmosaic™ system prediction software lets installers model coverage before a single box leaves the warehouse.
Frequency Range: 59 Hz - 20 kHz
The frequency response 59 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 135 dB
High SPL levels up to 135 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Woofer: 12"
Thanks to 12" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Inputs
- Balanced XLR
- Dante
- RJ45
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Тype
Bi-Amp
Yes
Multifunctional Housing
No
Pole Mount
No
Speakers
1x 12 "
DSP
LAN
Yes
Bluetooth
No
WiFi
No
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
Yes
Colour
Black
Bandwidth
2 Bandwidth
Housing
Plywood Housing
Inputs
USB
No
Outputs
XLR Thru, RJ45
MP3 / Line In
No
Memory Card Slot
No
AUX IN
No
Microphone Input
No
Battery Operation
No
Power Supply
powerCON
Batteries Included
No
Power Consumption
175 W
Mounting
Eye Bolt for Suspension
UK/EU Power supply included
No
Diameter (inch)
12
Diameter
12"
Height (cm)
68.3
Width (cm)
41.4
Depth (cm)
41.9
Net Weight (kg)
26.3
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
