Product code: F8ELH | ID: 270557
Engine Mariner F 8 M is quiet with very low emissions, characterized by low consumption, high corrosion resistance, which guarantees a very long service life. Engine Mariner is very high quality and refined in detail. The Mariner F 8 M has an exhaust driven through the center of the propeller, with a great torque and great force that caps at 6000 rpm. It also has a very high standard equipment: replacement candle, basic tool set, starter cord and fuse.
SPECIFICATIONS - | 8 |
HP / kW | 8 / 5,9 |
Engine type | Inline 2 |
Displacement (CID/CC) | 12.8 / 208 |
Full throttle RPM | 5000-6000 |
Fuel induction system | 2 valves per cylinder, single overhead cam (SOHC) |
Alternator amp / Watt | 6 amp / 76 watt |
Recommended fuel | Unleaded 90RON minimum |
Recommended oil | Mercury FourStroke Oil 10W-30 |
Engine protection operator warning system | Low oil pressure |
Over-rev | |
Starting | Electric |
Steering | Tiller |
Shaft length | 20" / 508 mm |
Gearcase ratio | 2.08:1 |
Dry weight *Lightest model available | 44 kg |
CARB star rating | 3 |
Bore and stroke | 2.16 x 1.73" / 55 x 44 mm |
Ignition | CDI w/electronic spark advance |
Fuel system | Carbureted |
Cooling system | Water-cooled with thermostat |
Gear shift | F-N-R |
Gearcase options | Standard |
Trim positions | Ratcheting |
Exhaust system | Through prop |
Shallow water drive | Yes |
Shallow water trim range (degrees) | 16 |
Remote fuel tank standard (gal / L) | 3,2 / 12 |
Color | Phantom Black |
Recommended accessories
Parameters and specifications
Number of Cylinders
Displacement (cm3)
Bore x Stroke mm
55 x 44
Full Throttle Operating Range RPM
5000 - 6000
Power HP
5,9
Power kW
8.0
Power (HP/kW)
Cooling System
Water-Cooled with Thermostat
Fuel Delivery System
Ignition System
Starting System
Alternator
Exhaust
Through Prop Hub Exhaust
Trim Method
Ratcheting
Trim Positions
5
Steering
Gear Ratio
2,08:1
Gear Shift
Fuel Tank Capacity
12 L
Oil Pan Capacity
0,8 L
Recommended Oil
Mercury FourStroke Oil 10W-30
Propeller Selection
6,5" - 9,5"
Shaft Length (cm)
Net Weight (kg)
Designed in
Japan
Made in
Japan