Product code: 460JE00432.50LBV | ID: 287627
Epoxy primer provides a high build, abrasion resistant anticorrosive barrier coat for all surfaces. It is also tolerant to a surface which cannot be prepared to the highest standard. Characteristics: - Compared to other primers, a reduced number of coats will achieve the specified thickness. - Protection against gel-coat osmosis blistering below water. - An ideal primer for fibre-glass, metal keels and above water areas. Type: Modified epoxy, ultra build primer. Recommended use: - Protection of all surfaces of yachts and pleasure crafts for above and below water. - Effective prevention of gel-coat osmosis blistering below water. Application details: - Thinner: Seajet thinner E, - Application data: Airless spray, brush, roller, - Min. temperature: 10 °C, - Max. humidity: 85% R.H. Degrease and clean using THINNER E wiping to remove all contamination. - Bare fibreglass: Abrade using P180-240 abrasive paper followed by final cleaning. Apply a single coat of SEAJET 118 (or 2 coats for osmosis protection). - Bare aluminium: Apply one coat of SEAJET 017, 3-4 coats of SEAJET 118. - Steel hulls and metal keels: Sand blast to SA 2½ or hand prepare bare areas. Apply 3-4 coats to achieve the required minimum film thickness of 250 microns. Coverage rate when rolling: 17.8m²/lt Pack size: 2.5lt Colour: Silver Bronze
Hazard Statements:
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H317 May cause an allergic skin reaction.
H362 May cause harm to breast-fed children.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
Parameters and specifications
Volume
Made in
Netherlands
Recommended accessories