Superlux HMD685A Black PC headset
The Superlux HMD685A is a single-ear broadcast intercom headset built for studio and live production teams. A closed-back ear cup with a 40 mm neodymium driver delivers clear comms audio across a 20 Hz to 20 kHz range while keeping the wearer aware of the surrounding environment. The anti-vibration gooseneck boom carries a dynamic cardioid microphone tuned for speech, and raising the boom to the upright position automatically mutes the mic. The 1.5 m cable terminates in a 4-pin female XLR connector that plugs straight into Tecpro, Clearcom, Granite, ASL, and Altair beltpacks.
- Single-sided closed-back design with 40 mm neodymium driver for clear comms and passive noise isolation
- Dynamic cardioid microphone on a flexible, anti-vibration gooseneck boom — tailored for speech
- Automatic boom-position mute: lift the boom to go off-air, lower it to go live
- 1.5 m cable with XLR4F connector, compatible with the Superlux IS103A intercom system and major beltpack brands
Broadcast Intercom Headset for Studio and Live Production
The Superlux HMD685A is a single-ear intercom headset designed for broadcast, theatre, and live-event production teams. The closed-back ear cup with a 40 mm neodymium driver delivers clear comms detail across a 20 Hz to 20 kHz range while keeping the wearer aware of the surrounding environment. A flexible anti-vibration gooseneck boom carries a dynamic cardioid microphone tailored for speech, holding its position without drifting.
What Makes This Headset Stand Out
The boom arm rotates fully for left or right ear wearing, essential for stage management, sound, and lighting roles where the headset may be worn for hours. Raising the boom to the upright position automatically mutes the microphone — a clean way to go off-mic without touching a button. The closed-back ear cup provides passive noise isolation without sealing the wearer off, so comms stay intelligible while the operator still hears the stage.
Technical Specifications
Every component is built around the realities of professional intercom use, from the high-impedance dynamic driver to the speech-tuned microphone capsule.
- Construction: Closed-back, single-sided — passive noise isolation with one open ear for situational awareness
- Driver: 40 mm neodymium — delivers clear comms detail across the full 20 Hz to 20 kHz range
- Headphone Impedance: 400 Ohm — pairs cleanly with professional intercom beltpacks and station gear
- Microphone: Dynamic, cardioid (unidirectional) — rejects ambient noise and focuses on the operator's voice
- Reversible Boom Arm — the gooseneck rotates fully for left or right ear wearing and holds its position without drifting
- Cable & Connector: 1.5 m cable with XLR4F (4-pin female) — plug-and-play with Tecpro, Clearcom, Granite, ASL, and Altair beltpacks
Who This Headset Is For
The Superlux HMD685A is the right choice for broadcast crews, theatre stage managers, live-event production teams, and houses of worship technical staff who need a reliable single-ear intercom headset for long shifts. It pairs directly with the Superlux IS103A intercom starter kit and works with the major wired intercom beltpack brands already installed in most venues. The reversible boom and automatic mute make it practical for shared use or extended wear.
Cable Length
Frequency Range
20 Hz - 20 kHz
Impedance (Ohm)
Microphone Frequency Response
50 Hz - 15 kHz
Capsule Type
Dynamic
Colour
Impedance
Construction Method
Type-A Connector
Battery Operation
No
Made in
Taiwan
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.