Product code: DD-580 | ID: 228002
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. - Premium low-noise Mic Pre with up to 60dB of gain - Variable-Frequency Low-Cut Filter - Low and High Detail Equalization - 20dB Pad - Polarity Invert - +48V Phantom Power - 1/4 " Front Panel Instrument Input - VU Meter - Peak Indicator
Input Type | Electronically balanced/unbalanced, RF filtered |
Input Impedance | 1.7kΩ |
Max Input Level | +15 dBu balanced or unbalanced (20dB PAD disabled) +35 dBu balanced or unbalanced (20dB PAD enabled) |
Maximum Gain | 60dB |
CMRR | >60 dB; typically >70 dB from 20 Hz - 20 kHz |
Instrument Input Connector | Tip-Sleeve ¼" Jack |
Instrument Input Type | Unbalanced |
Instrument Input Impedance | 500 k Ω |
Max Instrument Input Level | +21 dBu unbalanced |
Output Type | Electronically balanced/unbalanced, RF filtered |
Output Impedance | Balanced 30 Ohms, unbalanced 15 Ohms |
Max Output Level | +22dBu |
EIN | Typically > -128.0 dBu, 150 Ω source impedance, 22 kHz bandwidth, unweigh |
Frequency Response | 20Hz - 20kHz, +0/-1dB; <10Hz - 30kHz, +0/-3dB |
THD+Noise | <0.006% typical, 20Hz - 20kHz, 0dBu out |
Power Requirements | +/- 16V DC |
Power Current Draw | 80 mA per power rail |
Power Draw | 2.56 watts |
Rack System Compatibility | 500 Series Compatible Power-frame |
Rack Space | 1 Slot |
Dimensions (H x W x D) | 5.25" x 1.5" x 6" (13.34 cm x 3.81 cm x 15.24 cm) |
Weight | 1.3 lbs (0.59 kg) |
Shipping Weight | 1.7 lbs (0.77kg) |
Parameters and specifications