Choose country for shipment delivery

FiiO FT15 On-ear Headphones

Product code: 1339126

FiiO FT15 On-ear Headphones

Product code: 1339126

The FiiO FT15 is an open-back planar magnetic over-ear headphone built around an 800-nanometer ultra-thin diamond-coated diaphragm — 86.7% thinner than the previous generation. A 101 mm driver with 6,443.5 mm² of effective vibrating area delivers wide dynamics, while 95 dB/mW sensitivity and 24 Ω impedance let portable DACs and dongles drive it…
  • Construction Method: Open
  • Frequency Range: 7 Hz - 40 kHz
  • Impedance: 24 Ohm
  • Active noise cancellation: No

FiiO FT15 On-ear Headphones

The FiiO FT15 is an open-back planar magnetic over-ear headphone built around an 800-nanometer ultra-thin diamond-coated diaphragm — 86.7% thinner than the previous generation. A 101 mm driver with 6,443.5 mm² of effective vibrating area delivers wide dynamics, while 95 dB/mW sensitivity and 24 Ω impedance let portable DACs and dongles drive it comfortably. At 425 g with North American FAS-grade black walnut ear cups, it stays light enough for long sessions.

  • 800 nm diamond-coated nano-diaphragm planar driver for fast transient response
  • 101 mm driver with 6,443.5 mm² effective vibrating area — 35% larger than the FT5
  • 95 dB/mW sensitivity and 24 Ω impedance for easy portable drive
  • Two swappable ear-pad sets (suede and protein leather) included in the box

FiiO FT15 Open-Back Planar Magnetic Headphones

The FiiO FT15 is an open-back planar magnetic over-ear headphone that pushes the planar category forward with an 800-nanometer ultra-thin diaphragm and FiiO's first full-surface diamond coating. A 101 mm driver with 6,443.5 mm² of effective vibrating area delivers wide dynamic swings and a naturally open soundstage, while 95 dB/mW sensitivity and 24 Ω impedance keep it friendly to portable players and dongles. At 425 g with North American FAS-grade black walnut ear cups, it stays light enough for long sessions.

What Sets This Headphone Apart

The diaphragm is 86.7% thinner than the previous generation, approaching the physical limits of the material, and finished with a vapor-deposited diamond coating that adds rigidity and pushes frequency response out to 40 kHz. A patented uniform magnetic field design, combined with a 28 nm chip-grade electroplated voice coil, suppresses breakup vibration at the source. Out of the box, the 4.4 mm balanced cable uses 6N monocrystalline copper treated for 100+ hours at -192 °C, and the package ships with 6.35 mm and XLR-4 adapters plus a Yaoli linen storage case.

Driver, Sensitivity, Build and Package

Planar magnetic drivers behave differently from dynamic drivers, and the FT15's numbers are tuned to make that behavior practical in everyday setups.

  • Driver Type: Planar magnetic, 101 mm with 6,443.5 mm² effective vibrating area
  • Sensitivity: 95 dB/mW — high enough for portable DACs and dongles
  • Impedance: 24 Ω — low enough that most sources reach comfortable listening levels
  • Frequency Range: 7 Hz - 40 kHz — extends well beyond the audible band thanks to the diamond coating
  • Weight: 425 g — roughly 50 g lighter than typical planar headphones
  • Cable and Package: 1.5 m 4.4 mm balanced cryo-treated cable, 6.35 mm and XLR-4 adapters, two ear-pad sets, Yaoli linen storage case

Who Should Consider the FT15

Listeners who want a planar magnetic headphone driven straight from a portable DAC or dongle without a dedicated desktop amplifier will find the FT15 a strong match. It suits audiophiles stepping up from a dynamic-driver over-ear who want faster transients, lower distortion, and a more open soundstage. The warm, natural tuning with deep, solid bass works well for classical, jazz, acoustic, and well-produced modern genres. Two included ear-pad sets (suede and protein leather) give a choice of pad material without buying extra accessories.

Construction Method

Construction Method: Open

These open-back headphones are designed to provide a natural sound experience that is unique in its width and spaciousness. Compared to closed-back headphones, the open design allows for better reproduction of high and mid frequencies, resulting in a more accurate and detailed sound image. The open design makes the sound rich and spacious, ideal for discerning listeners who want to enjoy high-quality music or movies in a home or studio environment.

Frequency Range

Frequency Range: 7 Hz - 40 kHz

The frequency response 7 Hz - 40 kHz provides a wide enough range to capture all the fine musical and sonic details.

Package Contents

Package Contents

  • Headphone Cable
  • Manual
  • Adapter 6,3 mm
  • Case
  • Ear Pad
  • XLR Adapter

Suitability

Type

Over-Ear Headphones

Speaker Type

Planar Magnetic Driver

Size

Cable Length

1,5 m

Features

Microphone

No

Active noise cancellation

No

Bluetooth

No

Properties

Frequency Range

7 Hz - 40 kHz

Impedance

24 Ohm

Material

Construction Method

Open

Connectors

Type-A Connector

Jack 4.4 mm male

Acoustics

Sensitivity

95 dB, 111 dB

Dimensions and Weight

Weight (g)

425

Country

Made in

China

Documents

Manufacturer information
Manufacturer:
Guangzhou FiiO Electronics Technology Co., Ltd.
No.21 Longliang Road, Xialiang Village, Longgui Street, Baiyun District, 510540, Guangzhou,Guangdong, China
Responsible person:
FiiO
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.