- Тype: 2 Bandwidth
- Power: 1300 W
- Woofer: 12"
- Tweeter: 1"
- Crossover Frequency: 2 kHz
Mackie Thrash 12v2 Active Loudspeaker
The Mackie Thrash 12v2 is a 12-inch powered loudspeaker built for musicians, DJs and small-venue performers who need serious volume without a complicated setup. Class D amplification delivers 1300 W of peak power, while integrated DSP with four voicing modes and a Feedback Eliminator keeps the sound clean at any level. Bluetooth streaming and stereo linking cut cable clutter, and the rugged frame with metal handles makes transport painless.
- 1300 W Class D amplifier pushing 129 dB max SPL for loud vocals and driving guitar tones
- Four voicing modes — Flat, DJ, Live and Wedge — adapt the response to any role on stage
- Bluetooth wireless streaming plus the ability to link two cabinets in stereo or dual mono
- Single XLR/TRS combo input with mic/line switch, plus XLR mix output for daisy-chaining
Raw Power for the Working Performer
The Mackie Thrash 12v2 is a 12-inch powered loudspeaker built to put serious volume within reach of anyone stepping into live audio. A Class D amplifier pushes 1300 W of peak power to reach 129 dB max SPL — enough headroom to cut through screaming guitars and driving vocals in rehearsal rooms, small clubs and outdoor events. The 12-inch woofer and 1-inch compression tweeter cover 45 Hz to 18 kHz for full-range response that handles bass, vocals and cymbals without compromise.
Smart DSP and Wireless Connectivity
What separates this model from bare-bones budget cabinets is its built-in processing. Four voicing modes — Flat, DJ, Live and Wedge — re-tune the response at the press of a button, so the same speaker works as a front-of-house PA, a DJ rig or a floor wedge. The Feedback Eliminator suppresses the ear-piercing squeal when a mic gets too close to the cabinet. Bluetooth streaming lets a phone or laptop feed audio wirelessly, and two units can be linked for true stereo or dual-mono playback without extra cables.
Technical Specifications
Every parameter below is engineered to keep setup fast and the sound dependable night after night.
- Amplifier Power: 1300 W Class D — peak headroom for vocals and instruments in small-to-medium venues
- Max SPL: 129 dB — headroom for loud vocals and full-band music
- Frequency Range: 45 Hz – 18 kHz — full-range response covering bass, vocals and cymbals
- Drivers: 12-inch woofer + 1-inch compression tweeter — two-way bi-amped configuration
- Inputs: 1 × XLR/TRS combo + Bluetooth — plus XLR Mix Out for daisy-chaining
- Voicing Modes: Flat, DJ, Live, Wedge — onboard DSP adapts the response to the role
Who This Speaker Is Built For
This model is aimed at first-time PA buyers, solo performers, mobile DJs and small-event hosts who want loud, dependable sound without paying for features they will never use. Its single XLR/TRS combo input covers both microphone and line-level sources, so plugging in a mixer, a vocal mic or an instrument is a one-cable job. The Bluetooth input makes it equally useful for backyard parties and wedding receptions where a phone or laptop is the only source. For performers who also need stage monitoring, the wedge-mode voicing and multifunctional cabinet let the same speaker pull double duty as a floor monitor. The Mackie Thrash 12v2 is the right choice for entry-level artists who need a single rugged cabinet that can handle PA, monitor and wireless playback duties.
Frequency Range: 45 Hz - 18 kHz
The frequency response 45 Hz - 18 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 129 dB
High SPL levels up to 129 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Bi-Amp
Yes
Multifunctional Housing
Yes
Pole Mount
Yes
DSP
Controls
Gain, Level, Mic/Line Switch, Bluetooth Pairing Button, Voicing, Feedback Eliminator
LAN
No
Bluetooth
Yes
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Middle Speaker
Tweeter
Crossover Frequency (kHz)
2
Crossover Frequency
2 kHz
Bandwidth
2 Bandwidth
Power RMS (Watt)
500
Power RMS
500 W
Sound Pressure Level - SPL (dB)
Sound Pressure Level (SPL)
129 dB
Battery Operation
No
Power Supply
100V - 240V
Power Consumption
300 W
UK/EU Power supply included
No
Diameter (inch)
12
Diameter
12"
Height (cm)
61.4
Width (cm)
35.3
Depth (cm)
34.8
Net Weight (kg)
13.9
Weight
13,9 kg
Made in
China
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
