Cordial CSM FM-GOLD 250 10 m Microphone Cable

High-End Studio Microphone Cable for Clean Signal Transfer

The Cordial CSM 10 FM-GOLD 250 is a 10 m ready-made microphone cable from the brand's PEAK series, designed for demanding vocal and instrument recording sessions. It is built on the CMK 250 bulk cable, whose 0.5 mm² bare-copper conductor keeps signal attenuation extremely low so the brilliance of the source reaches the preamp intact. Spiral shielding wraps the two twinned cores to reject electrical interference, while a 6.4 mm PVC outer jacket protects the assembly during daily studio and stage use.

Both ends are terminated by Neutrik 3-pin XLR connectors — male on one side, female on the other, both straight — fitted with gold-plated contacts that minimise the risk of corrosion over years of plugging and unplugging. The cable ships with a hook-and-loop fastening strap for tidy storage and transparent shrink sleeves near each connector for individual labelling.

What This Cable Delivers in Practice

• Length: 10 m — bridges typical distances between a microphone on a stand and an audio interface, mixer or stage box.
• Connector A / B: XLR male 3-pin / XLR female 3-pin, Neutrik, straight-straight — the universal pairing for dynamic and condenser microphones.
• Conductor: bare copper, 0.5 mm² / AWG 21 (28 × 0.15 mm strands) — large cross-section for low-loss transmission of the full audio spectrum.
• Shielding: spiral copper screen — blocks hum and RF interference in electrically noisy environments.
• Jacket & Diameter: PVC, 6.4 mm outer diameter — durable yet flexible enough to coil neatly after a session.
• Capacity: 60 pF/m (conductor to conductor) — very low capacitance preserves high-frequency detail over the 10 m run.
• Included accessories: hook-and-loop cable tie and transparent shrink sleeves for custom marking — keep the cable organised and identifiable in a multi-cable studio or stage rig.