Choose country for shipment delivery

RockBoard RBO CAB F TMXB 60 BK 60 cm MIDI Cable

Product code: 1338162

RockBoard RBO CAB F TMXB 60 BK 60 cm MIDI Cable

Product code: 1338162

The RockBoard Flat Mini-TRS to FlaX Midi Type B 60 cm cable is a flat-profile MIDI cable designed for compact pedalboard installations where space is at a premium. It pairs an omni-directional, lockable DIN 5-pin MIDI plug with a flat angled 3.5 mm TRS jack to deliver clean, reliable MIDI transmission in tight rigs. The 60 cm length covers typical…
  • Length: 60 cm
  • Type-A Connector: MIDI Male
  • Type-B Connector: Jack STEREO 3,5 mm Male
  • Connector Angle: Straight - Angled

RockBoard RBO CAB F TMXB 60 BK 60 cm MIDI Cable

The RockBoard Flat Mini-TRS to FlaX Midi Type B 60 cm cable is a flat-profile MIDI cable designed for compact pedalboard installations where space is at a premium. It pairs an omni-directional, lockable DIN 5-pin MIDI plug with a flat angled 3.5 mm TRS jack to deliver clean, reliable MIDI transmission in tight rigs. The 60 cm length covers typical pedal-to-controller distances without leaving slack that gets in the way of stomping.

  • Length: 60 cm — ideal for short pedalboard-to-controller runs
  • Connector A: 5-pin DIN MIDI male (FlaX) — omni-directional, lockable orientation
  • Connector B: 3.5 mm stereo TRS male — flat angled plug for low-profile routing
  • Type B pinout: MIDI 4 (Source) → TRS tip, MIDI 5 (Sink) → TRS ring, MIDI 2 (Shield) → TRS sleeve

RockBoard Flat Mini-TRS to FlaX Midi Type B 60 cm — Compact MIDI Cable for Tight Pedalboard Setups

This cable is built for crowded pedalboards where every millimetre counts. It pairs an omni-directional, lockable DIN 5-pin MIDI plug with a flat angled 3.5 mm TRS jack for clean MIDI transmission. The 60 cm length covers typical pedal-to-controller distances without leaving slack that gets in the way of stomping.

What Sets the FlaX Plug Apart

The FlaX plug is omni-directional — it rotates to almost any angle and locks in place using a 1.5 mm hex key. The cable exits a pedal in the direction that suits the layout, instead of forcing the player to bend the cable around an awkward connector.

Flat Cable Profile for Clean Routing

The flat rectangular conductor hugs the pedalboard surface instead of bulging upward, so cables run underneath patch cables without creating pressure points or jams.

  • Length: 60 cm / 23 5/8" — covers typical pedal-to-controller distances without excess slack
  • Cable Profile: flat rectangular — reduces twisting and mechanical stress
  • Colour: black — discreet on dark pedalboards and stage rigs

Omni-Directional MIDI Plug and Flat TRS Jack

The MIDI end uses a compact omni-directional DIN 5-pin plug that can be rotated to straight, angled left, or angled right before being locked. The 3.5 mm end is a flat angled TRS stereo jack that sits low against the device housing.

  • Connector A: 5-pin DIN MIDI male (FlaX) — omni-directional, lockable via 1.5 mm hex key (not included)
  • Connector B: 3.5 mm TRS stereo male — flat angled housing for low-profile insertion
  • Connector Angle: straight-to-angled — MIDI plug straight, TRS plug angled

TRS-MIDI Type B Wiring and Device Compatibility

This cable is wired to the TRS-MIDI Type B standard, which swaps the Source and Sink pins compared to Type A. Type B is the convention used by Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox devices, so it drops straight into those rigs without any adapter.

  • Classification: TRS-FlaX MIDI Type B — MIDI 4 (Source) → TRS tip, MIDI 5 (Sink) → TRS ring, MIDI 2 (Shield) → TRS sleeve
  • Compatible With: Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and many more
  • Package Content: 1 × MIDI cable

Suitability

Type

MIDI Cable

Compatible with

Universal

Properties

Colour

Black

Inputs and Outputs

Microphone Input

No

Connectors

Type-A Connector

MIDI Male

Type-B Connector

Jack STEREO 3,5 mm Male

Connector Angle

Straight - Angled

Package

Package Contents

MIDI Cable

Dimensions and Weight

Length

60 cm

Country

Made in

China

Documents

Manufacturer information
Manufacturer:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Germany
Responsible person:
Warwick GmbH & Co Music Equipment KG
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.