Ernie Ball Accessories
Ernie Ball accessories are mainly strings and cables from the Californian manufacturer that became famous for its Slinky guitar strings in colourful packs. Here you'll find string sets for electric, acoustic, bass and classical guitar, single strings for replacing one at a time, plus instrument, patch, microphone and speaker cables. The range is rounded off with string winders, a clip-on tuner, cleaning products and wall hangers for guitars. Most of the strings and cables are made in the USA.
Which Ernie Ball cable do you need?
- An instrument cable connects a guitar or bass to an amplifier or the first effect. It is shielded against hum, and you choose the length, most often 3 to 6 m, straight or angled jack plugs, a braided jacket or a coiled cable.
- Patch cables from 15 cm long connect the effects pedals on a pedalboard. Flat Angle low-profile angled plugs take up less space between pedals and are often sold in packs of three.
- A microphone cable has XLR connectors and belongs with a microphone, not with a guitar.
- A speaker cable connects an amplifier to a speaker cabinet. It is not shielded like an instrument cable, and an instrument cable cannot handle the amplifier's power output, so never mix up these two types.
You can compare all lengths and types in Ernie Ball Cables, Connectors and Adapters.
A full string set or a single string?
When one string breaks and the rest of the set is still fresh, a single Ernie Ball string in the gauge you need is enough; they are sold in packs of six, from thin plain strings to thick wound ones. Replace the whole set when the strings have lost their shine, are hard to keep in tune or sound dull. For electric guitar there are nickel Slinky sets, for acoustic guitar Earthwood in 80/20 bronze or phosphor bronze, for classical guitar Ernesto Palla nylon strings, and for bass guitar also smooth Flatwound strings with a mellower tone. The set names and their gauges are compared clearly on the Ernie Ball Instrument Strings page.
What helps when changing strings and caring for your guitar?
A string winder fits over the button of the tuning machine, so you can loosen the old string and wind on the new one faster than with your fingers. A clip-on tuner clips onto the headstock and tunes by picking up vibration, so other players in the room don't throw it off. A wall hanger keeps the guitar on the wall, where nobody can knock it off a stand. Products for the strings, the fingerboard and the instrument's finish are in the Ernie Ball Cleaning and Care section.
