Do the Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135) have tapered or non-tapered cores on the low B and E strings, and will they fit properly through-body stringing on a Fender Jazz V?

The Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135) have non-tapered cores on the low B and E strings. They are standard long scale strings and generally fit most Fender Jazz V basses with through-body stringing. However, for string-through setups, double-check your instrument’s scale length and string path to ensure proper fit.

Are the Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135) compatible with a 35" scale bass, or are they best suited for standard 34" scale instruments?

Yes, the Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135) can be used on a 35" scale bass, but the string length is optimized for standard 34" scale instruments. For a 35" scale, you may find the winding does not always reach the tuning posts, especially on the low B string, which could affect tone and durability. For best performance, consider strings specifically labeled as "long scale" or designed for 35" scale basses.

Are the Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135 gauge) suitable for a 35" scale bass, or will I run into issues with string length or tension?

The Ernie Ball Power Slinky 5-String Nickel Wound Bass Strings (50-135 gauge) are designed to fit most 5-string basses with up to a 34-inch scale. For a 35-inch scale bass, these strings may be a bit short, especially for through-body stringing, and you might run into issues with winding the thicker part of the string around the tuning post. For best results and proper tension, consider looking for strings specifically labeled as "long scale" or check the string's winding length to ensure compatibility with your 35-inch scale bass.

Does the Ibanez Tim Henson TOD10N support high-tension nylon strings without risking damage to the neck or bridge, or is it optimized only for standard tension sets?

The Ibanez Tim Henson TOD10N is designed for standard tension nylon strings, as used on most nylon-string electric guitars. Using high-tension nylon strings may put extra stress on the neck and bridge, potentially risking damage over time. For best performance and to avoid any issues, it's recommended to stick with standard or normal tension nylon strings. This information is supported by Ibanez’s official product details and user feedback.

Ernie Ball 2821 Power Slinky Nickel 050-135 Bass guitar strings

4.85

7 x rated

Brand: Ernie Ball

Product code: 289578 (P02821)

Ernie Ball 2821 Power Slinky Nickel 050-135 Bass guitar strings

4.85

7 x rated

Brand: Ernie Ball

Product code: 289578 (P02821)

US$32

US$33

Excluding tax and duty

In stock > 5 pcs.

This product cannot be delivered to your country at the moment.

Ask a question

Save

Compare

Report a better price

Guard the price

16 points

Ernie Ball 2821 Power Slinky Nickel 050-135 Bass guitar strings

US$32

US$33

Also check our bargain alternatives. You might be interested in them:

Purchase this product as "Like new" from US$30.90US$32.77

5-string electric bass strings are made from nickel plated steel wrapped around a hex shaped steel core wire. Each bass guitar string produces a bright, balanced tone and manufactured with the finest and freshest raw materials. Gauges: .050, .070, .085, .105 .135.

Number of Strings: 5
Length: Long Scale
Gauge: 050" / 135"
Material: Nickel Plated Steel
Wound: Round Wound
Ending: Ball End