- Power: 500 W
- Number of Channels: 1
- External FX Loop: Yes
- Headphone Output: Yes
- DI Output: Yes
Markbass Little Mark Gen Z H0 500 Solid-State Bass Amplifier
The Markbass Little Mark Gen Z H0 500 is a 500 W solid-state bass amplifier head built around a unique 12-position TONE rotary control that delivers instant access to Flat, Modern, and Vintage EQ voicings. Weighing just 2.2 kg in a compact 276 x 258 x 81 mm chassis, this lightweight head delivers touring-grade Markbass tone with proprietary MPT power-amp technology, an integrated Aux In and headphone output for silent practice, and a backlit Smart Glow Input that flashes when the signal clips.
- 500 W @ 4 Ohms / 300 W @ 8 Ohms of proprietary MPT bass power in a 2.2 kg head
- Revolutionary 12-position TONE rotary with 4 Flat, 4 Modern, and 4 Vintage EQ presets
- Aux In (3.5 mm), headphone output (3.5 mm), XLR DI with Pre/Post-EQ switch and ground lift
- Smart Glow Input jack lights up when signal clips — visual feedback on dark stages
Markbass Little Mark Gen Z H0 500 — Instant Tone, Touring-Grade Power
The Markbass Little Mark Gen Z H0 500 is a 500 W solid-state bass amplifier head engineered for a new generation of bassists, producers, and content creators who want studio-grade tone without the setup time. Inspired by the workflow of software plug-ins, this head packs the iconic Markbass sound into a compact 2.2 kg chassis, delivering 500 W @ 4 Ohms (300 W @ 8 Ohms) of proprietary MPT power for earth-shaking lows and clear transient response. The Little Mark Gen Z H0 500 is the right choice for working bassists who need mix-ready tone the moment they plug in, on stage, in the studio, or at home.
The 12-Position TONE Rotary: One-Knob EQ Workflow
What truly sets this head apart is the exclusive 12-position TONE rotary control, organized into three macro-categories — Flat (pure and organic), Modern (scooped and aggressive), and Vintage (warm and old-school) — with four presets per family. Instead of dialing in a complex EQ curve from scratch, players load a record-ready voicing in a single click, eliminating lengthy sound-checks. The backlit Smart Glow Input jack adds another layer of innovation: it lights up to confirm the amp is alive and flashes dynamically when the input signal starts to clip, giving players a visual safety net on dark stages without staring at a tiny dashboard.
500 W MPT Power in a Lightweight Touring Head
At the heart of this amplifier sits Markbass's proprietary MPT (Mark Proprietary Technology) power amp, specifically designed for bass frequencies. The lightweight design delivers the lightning-fast transient response that defines the Markbass signature, with enough headroom to drive cabinets with authority while keeping the rig portable enough for any touring bassist.
- Power Output: 500 W @ 4 Ohms / 300 W @ 8 Ohms — earth-shaking lows with clear definition
- Power Amp Technology: Proprietary MPT (Mark Proprietary Technology) — bass-tuned response and headroom
- Weight: 2.2 kg — easy to carry in a gig bag or backpack
12-Position TONE Rotary Plus Surgical 2-Band EQ
The signature 12-position TONE rotary control is the headline feature, but the head still includes a 2-band analog EQ (Low and High) for surgical room adjustments. Five analog controls — Gain, Low, High, Volume, and DI Level — keep the front panel uncluttered, so players can tweak low-end thump or high-end definition to match the room without breaking creative momentum.
- TONE Rotary: 12 positions (4 Flat, 4 Modern, 4 Vintage) — instant access to record-ready voicings
- EQ Bands: 2-Band analog (Low, High) — surgical room adjustments on the fly
- Front-Panel Controls: Gain, Low, High, Volume, DI Level — uncluttered layout for fast tweaks
A Modern Hub for Stage, Studio, and Silent Practice
Connectivity is where this head earns its "Gen Z" name. An integrated 3.5 mm Aux In lets players jam along with backing tracks or layer tracks in the studio, while the 3.5 mm headphone output turns the unit into a silent practice and content-creation rig. A balanced XLR DI output with Pre/Post-EQ switch and ground lift feeds the front-of-house mix cleanly, and a footswitch input handles Mute or Boost On/Off for hands-free control on stage.
- DI Output: XLR with Pre/Post-EQ switch and ground lift — clean FOH signal with hum rejection
- Aux Input: 3.5 mm jack — jam along with backing tracks or stream audio
- Headphone Output: 3.5 mm jack — silent practice and late-night tracking
- Footswitch Input: for optional footswitch (not included): Mute or Boost On/Off — hands-free stage control
- Effects Loop: Send/Return — integrate outboard effects cleanly
- Speaker Outputs: 1 x Speakon (2-pole) + 2 x 6.3 mm jack in parallel, 4 Ohm min. — flexible cabinet pairing
- Dimensions: 276 x 258 x 81 mm — 2 rack units high
Built for Touring Bassists, Producers, and Modern Creators
The Little Mark Gen Z H0 500 is the right choice for working bassists, producers, and content creators who need mix-ready Markbass tone without sacrificing portability or workflow speed. Touring players benefit from the 2.2 kg weight, the 500 W MPT power section, and the visual Smart Glow Input that prevents clipping on dark stages. Studio producers and home recorders get a versatile hub with Aux In, headphone monitoring, and an XLR DI that feeds the recording interface with or without EQ applied. The 12-position TONE rotary makes the head equally at home in rock, modern pop, vintage soul, and slap-driven funk setups, while the footswitchable Mute and Boost cover hands-free transitions during a live set.
Power: 500 W
With power up to 500 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.
Number of Channels: 1
This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.
External FX Loop: Yes
The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.
Headphone Output: Yes
The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.
Footswitch Input Port: Yes
It has a footswitch input that allows you to control various functions of the unit without using your hands. With this feature, you can easily switch effects, channels, or other settings while playing, which is ideal for live performances and smooth control without interrupting your game.
DI Output: Yes
Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.
Controls
- Low
- Ground/Lift Switch
- High
- Volume
- Line Out Level
- Gain
- Tone
- Pre/Post EQ
- Boost
Inputs
- Footswitch
- Jack 6,3 mm
- Return
- 3,5 mm Jack AUX IN
Outputs
- XLR
- Speaker OUT Jack 6,3 mm
- Headphone Jack 3,5 mm
- Send
- Speakon
Type
Bass Amplifier
Number of Channels
External FX Loop
Number of Input Ports
Controls
Gain, Low, High, Tone, Line Out Level, Volume, Ground/Lift Switch, Pre/Post EQ, Boost
Tuner
Power (Watt)
Power
Electronics
Type of Electronics in the Power Amplifier
Rackmountable
Headphone Output
MP3 / Line In
Footswitch Input Port
USB
DI Output
Connection for External Speaker
Line Output
Yes
Inputs
3,5 mm Jack AUX IN, Footswitch, Jack 6,3 mm, Return
Outputs
Speakon, Speaker OUT Jack 6,3 mm (2 x), XLR, Send, Headphone Jack 3,5 mm
Power RMS
500 W
Built-in Effects
Battery Operation
No
Power Supply
230 V
Incl. Footswitch
Width (cm)
27.6
Depth (cm)
25.8
Height (cm)
8.1
Weight
2,2 kg
Made in
Italy
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
