Bugera PS1 Power Soak Attenuator Load Box

The PS1 POWER SOAK is the answer for tone-craving guitarists everywhere, letting you drive the output tubes of your amp hard enough to squeeze out every drop of tone at any volume. The PS1 works with virtually any tube amp up to 100 Watts (4, 8 or 16 Ohms) and your favorite speaker cabinet, plus provides a Line output with dedicated level control and an Emulated Mic output to send your signal to the mixing console.
The PS1 POWER SOAK is designed to be inserted between your tube amp and your speaker cabinet. Just run a speaker cable from the output of your amp to the corresponding PS1 Amp Input jack that matches your amplifier’s operating impedance (4, 8 or 16 Ohms), and run a second speaker cable from PS1’s Speaker Output to your cabinet. Power up your amp and dial in your favorite sound, then adjust the large Soak knob to the ideal volume level. All the tone, without all the volume – it’s just that easy!
On PS1’s rear panel you’ll find a convenient Line output jack for connecting to an external power amplifier for running additional speaker cabinets, or to effects processing gear in professional applications such as the recording studio. The signal from the Line output does not have speaker/ mic emulation, but does feature its own dedicated Level control.
Now that you have your stage volume under control, you can stick a mic in front of your speaker or better yet, use PS1’s built-in Emulated Mic Output to get all that great tone to the front of house (FOH) or recording console. This balanced XLR output mimics the sound captured by placing a microphone in front of your speaker without the need for any additional gear.