Light4Me SID3 Lighting Effect

LIGHT4ME SID3 is a 4-in-1 moving LED DMX lighting multi-effect for DJs, clubs and event companies, combining Beam, Magic Ball, Color Module and White Strobe effects in a single compact fixture. At a wedding, you can use moving beams above the dance floor, colorful background animations and rapid flashes to emphasize the chorus of a song. The fixture is also suitable for stages, clubs, pubs, dance halls and corporate events. Choose LIGHT4ME SID3 when you want to create a varied show without setting up several separate effects.

Four LIGHT4ME SID3 lighting effects create a complete show from a single fixture
The Beam effect uses twenty-four 3W LEDs, including 6 red, 6 green, 6 blue and 6 white light sources, producing clearly defined colorful beams. Two Magic Balls with 10W RGBW 4-in-1 LEDs spread multicolored light throughout the venue. Six Color Modules, each with forty 0.2W RGB LEDs, complement the other effects with animated patterns, while the 10W CW LED of the White Strobe effect emphasizes the rhythm with cool white flashes.
Six built-in shows let you quickly start a ready-to-use effect sequence, including four Beam and Magic Ball shows in R/G/B/W colors, one Color Module show and one White Strobe show. The fixture also offers 31 Color Module macros with adjustable speed, two automatic programs and two sound-activated programs. Microphone sensitivity and operating speed can be adjusted to the volume and character of the event.

Pan movement and dual-section Tilt direct the effects above the dance floor and toward the audience
Pan movement through a range of 0-540° allows the effects to sweep across a wide area, while its speed can be adjusted to match the tempo of the music. Two independent Tilt sections rotate through a range of 0-360° and support bidirectional infinite rotation.
A linear 0-100% dimmer makes it easier to build light intensity smoothly, from subtle background lighting to full brightness during the climax of a performance. An adjustable 0-20 Hz strobe lets you match the flash frequency to dance music, a concert or a stage presentation.

DMX control, remote control and sound mode simplify operation for beginners and lighting technicians
LIGHT4ME SID3 can operate automatically, via the DMX protocol, in sound mode and in master/slave mode, as well as be controlled manually. DMX control uses 18 channels, allowing movement, colors, brightness, strobe and programs to be controlled from a lighting console. The IR remote control with a CR2025 battery allows settings to be changed quickly without approaching the fixture.
A four-digit LED display and four buttons make parameter configuration easier. The menu allows you to control the backlight, reverse the display orientation and reset the fixture. DMX input and output on 3-pin XLR connectors allow up to 28 fixtures to be connected in one signal line, while the IEC C14 power input works with the included 1.5 m power cord.

Where can the LIGHT4ME SID3 moving lighting multi-effect be used?
This lighting multi-effect is designed for mobile DJs, bands, clubs and event organizers. It is suitable as lighting for weddings, clubs, stages, school parties, concerts, karaoke events and corporate events. Four types of effects help reduce the number of separate fixtures required to prepare an engaging show.
The fixture can operate on the floor or be mounted on a stand or truss. The omega bracket with an M6 mounting hole facilitates secure installation, while the active fan cooling system supports continuous operation. The black ABS housing and powder-coated iron bracket are designed for indoor use in accordance with the IP20 protection rating.

Technical specifications:

• Device type: moving LED DMX lighting multi-effect with a wireless remote control and mounting bracket
• Light sources:
• Beam: 24x3W R/G/B/W LEDs (R6/G6/B6/W6)
• Magic Ball: 2x10W RGBW 4-in-1 LEDs
• Color Module: 6 modules, each with 40x0.2W RGB 3-in-1 LEDs
• White Strobe: 10W CW LED
• Pan movement: 0-540°, adjustable speed
• Tilt movement: 2 sections, 0-360° rotation, bidirectional infinite rotation with adjustable speed
• Magic Ball light source color palette: RGBW (red, green, blue, white)
• White Strobe light source color: CW (cool white)
• Dimmer: linear, full-range (0-100%)
• Strobe effect: 0-20 Hz, adjustable operating frequency
• Built-in shows: 6 shows (4 Beam + Magic Ball shows - R/G/B/W colors, Color Module show, White Strobe show)
• Color Module macros: 31 macros, adjustable speed
• Auto mode programs: 2 programs, adjustable program speed
• Sound mode programs: 2 programs, adjustable microphone sensitivity
• Control: automatic, DMX, infrared wireless remote control, manual
• Remote control battery: CR2025 (included)
• Control panel: LED display (7-segment, 4-digit) + 4 buttons
• Operating modes: auto, DMX, master/slave, sound
• DMX channels: 18
• DMX data connectors: 3-pin male XLR (input) / female XLR (output)
• Power connector: male IEC C14 (input)
• Multiple fixture connection capability (DMX signal daisy chain): yes
• Maximum number of fixtures in a DMX line: 28
• Power cord length: 1.5 m
• Power supply voltage: AC 100-240V, 50/60 Hz
• Power consumption: 145W
• Fuse: 5A
• IP protection rating: IP20
• Cooling system: active (fan-cooled)
• Display backlight control: yes
• Display flip: yes
• Device reset: yes
• Floor operation and stand or truss mounting capability: yes
• Mounting hole in bracket: M6
• Housing material: ABS plastic
• Mounting bracket material: powder-coated iron
• Device color: black
• Device dimensions: 25.2 × 15 × 31 cm
• Net weight: 3.1 kg