- Power: 40 W
- Speakers: 10"
- Electronics: Solid State
- Type of Electronics in the Power Amplifier: Solid State
- DI Output: Yes
- Number of Channels: 2
Revoltage RV-40B Bass Combo
The Revoltage RV-40B is a 40W solid-state bass combo amplifier built for bassists who need a flexible practice and small-stage rig. It pairs a 10-inch speaker with a 4-band EQ, onboard compressor, and DI output for direct connection to a mixer or recording interface. Silent practice and play-along are simple, thanks to dedicated headphone and AUX inputs.
- 40 W of solid-state power through a single 10-inch speaker delivers full low-end response for home practice and intimate gigs.
- 4-band EQ with split mid frequencies (Mid Frequency and Mid Level) lets players dial in punch, presence, and growl without compromise.
- Built-in compressor evens out dynamics, ideal for slap, pop, and consistent lead lines.
- Plugging in headphones or an external device means you can practice or jam any time of day without disturbing anyone around you.
Revoltage RV-40B Bass Combo Amp — 40W of Tonal Control for Practice and Stage
The Revoltage RV-40B is a 40W solid-state bass combo amplifier built for bassists who want a single rig covering bedroom practice, rehearsals, and small-stage performances. A 10-inch speaker sits inside a compact 42.5 cm × 44.5 cm × 30 cm cabinet, keeping the footprint manageable without sacrificing low-end weight. This model is the right choice for bassists who need an affordable, feature-loaded combo that grows with their playing.
What Sets the RV-40B Apart in the Budget Bass Combo Category
Two features separate this combo from typical entry-level bass amps. With its 4-band EQ and split mid frequencies, you get independent control over Mid Frequency and Mid Level, a level of tonal shaping usually reserved for higher-tier combos. The built-in compressor provides on-demand dynamic smoothing for slap and pop techniques, no external pedal required.
Power and Speaker Configuration — Headroom for Practice and Small Gigs
Combining a 40W solid-state power stage and a 10-inch speaker, this combo produces enough volume and low-end response for home practice, band rehearsals, and intimate club performances. Solid-state circuitry helps keep weight at 12 kg, making transport between home and rehearsal simple and reliable.
- Power Output: 40 W — solid-state headroom for rehearsals and small gigs
- Single 10" speaker tuned for full-range bass response with enough air movement for slap and pick playing
- Power Amp Electronics: Solid State — consistent tone and lower weight than tube designs
Tone Shaping — 4-Band EQ with Split Mids and Onboard Compressor
Six front-panel controls give direct access to the most-used tone parameters. The 4-band EQ includes Bass, Treble, and split Mid controls for surgical midrange shaping. With a dedicated Gain knob for input level and grit, and a separate Volume control, it's easy to dial in your sound. The onboard compressor keeps dynamics even for slap and pop playing.
- Controls: Gain, Bass, Treble, Mid Frequency, Mid Level, Volume — full 4-band EQ plus input gain
- With the built-in compressor, players can smooth out dynamics for slap, pop, and lead playing without needing an external pedal.
- Number of Channels: 2 — switch between clean and overdriven voices
Connectivity and Practical Features — Silent Practice, Play-Along, and Direct Output
Modern bass workflows are supported with headphone and AUX inputs. Plugging in headphones enables silent practice at any hour, and the AUX input allows for jamming along with backing tracks from your phone or MP3 player. The balanced DI output sends a clean, low-impedance signal directly to a mixer or recording interface, ready for stage or studio.
- DI Output: Yes (balanced) — direct feed to mixer or audio interface
- Headphone Output: Yes — silent practice without disturbing others
- AUX / MP3 Line In for play-along with backing tracks from a phone or MP3 player
- Effects Loop: No — onboard compressor covers basic dynamics
- Footswitch Input: No — channel and EQ set manually on the top panel
- Weight: 12 kg — manageable for transport to rehearsals
Who the RV-40B Is Built For
This combo is a practical solution for beginner and intermediate bassists looking for one amp to cover practice, rehearsal, and small gigs, without the need for extra pedals. Its onboard compressor and split-mids EQ provide space for tone development, and the DI output makes it fit for direct recording or live sound. Bassists seeking a compact, lightweight rig with robust connectivity will find it adapts well from bedroom to stage use.
Revoltage — Bass Combos for Everyday Players
Revoltage designs amplifiers and cabinets aimed at players who need reliable, well-equipped gear at accessible price points. The RV-40B sits in the brand's bass combo lineup as a 40W practice and small-gig model, sharing the 1x10 speaker configuration with other entries in the Revoltage bass combo family.
Power: 40 W
With power up to 40 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.
Headphone Output: Yes
The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.
Controls
- Volume
- Mid Level
- Treble
- Gain
- Mid Frequency
- Bass
DI Output: Yes
Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.
Number of Channels: 2
This product has two channels, giving you the flexibility to connect two audio sources at once. This configuration allows you to combine different instruments and effects, enriching your sonic expression and giving you more variability.
Speakers
Number of Input Ports
External FX Loop
Number of Effects
Controls
Number of Channels
Power
Electronics
Type of Electronics in the Power Amplifier
MP3 / Line In
Footswitch Input Port
Headphone Output
Connection for External Speaker
DI Output
Built-in Effects
Weight
12 kg
Width (cm)
42.5
Height (cm)
44.5
Depth (cm)
30
All reviews come from verified customers who have purchased a product from us in the past.
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
