Allen & Heath dLive WAVES V3 Card Expansion Module for Mixers
Brand: Allen & Heath
Product code: 1327813
Brand: Allen & Heath
Product code: 1327813
Allen & Heath dLive WAVES V3 Card Expansion Module for Mixers
The Allen & Heath Waves V3 is a SoundGrid network interface card that slots into the I/O port of any dLive or Avantis mixer, adding 128 channels of bidirectional audio over a single Ethernet cable. It enables low-latency Waves plugin processing, multitrack recording at 96 kHz, and digital mic splitting through a built-in 3-port Ethernet switch with locking EtherCON connectors. The card is the right choice for live sound engineers who need to bridge their Allen & Heath console with the Waves plugin ecosystem.
- 128 x 128 channel I/O at 48 or 96 kHz for full-bandwidth Waves SoundGrid networking
- Integrated 3-port switch with redundant and switch modes for complex setups
- Multitrack recording and playback of up to 128 tracks via a single Cat 5e cable
- Compatible with dLive C Class, dLive S Class, and Avantis surfaces and mix racks
Waves SoundGrid Networking for dLive and Avantis Mixers
The Allen & Heath Waves V3 is a SoundGrid network interface card that installs into the I/O port of any dLive or Avantis digital mixing system, adding 128 channels of bidirectional digital audio over a single Ethernet cable. This turns a dLive or Avantis console into a fully integrated Waves SoundGrid endpoint for studio-grade plugin processing, multitrack recording at 96 kHz, and digital mic splitting. The Waves V3 suits live sound engineers bridging their Allen & Heath console with the Waves plugin ecosystem.
Built-In 3-Port Ethernet Switch and Input Sharing
What sets this card apart is its built-in 3-port Ethernet switch, allowing all three sockets to connect to different devices. Input sharing with Waves V2 and V3 cards scales channel counts across multiple consoles, while locking EtherCON connectors keep cables secure.
128 Bidirectional Channels at 48 or 96 kHz
Offering 128 inputs and 128 outputs simultaneously, the card operates at both 48 kHz and 96 kHz to match the SoundGrid network without additional hardware.
- Input Channels: 128 — full-bandwidth audio capture from the console
- Output Channels: 128 — playback and plugin return paths
- Sample Rates: 48 kHz / 96 kHz — switchable to match the SoundGrid network
Gigabit Ethernet with 3-Port Switch and EtherCON Connectors
Audio travels over a standard Gigabit Ethernet network using the Waves SoundGrid protocol, engineered for ultralow-latency real-time audio. The built-in 3-port switch supports redundant and switch modes.
- Network Protocol: Waves SoundGrid over Gigabit Ethernet
- Ports: 3 x locking EtherCON — redundant, switch, and bridge modes
- Maximum Cable Distance: 100 m per Cat 5e run
- Network Features: Thru switches and VLANs supported
dLive and Avantis Compatibility with Multitrack Recording
The Waves V3 fits dLive C Class and S Class surfaces and mix racks, plus Avantis consoles, supporting multitrack recording of up to 128 tracks at 96 kHz via Cat 5e.
- Compatible Mixers: dLive C Class, dLive S Class, Avantis
- Maximum Cards per System: 5
- Multitrack Recording: up to 128 tracks at 96 kHz via Cat 5e
- Computer Support: Mac and Windows — SuperRack, DAW Control, SoundGrid driver
Тype
Suitable for Brand
Allen & Heath
Compatible with
Allen & Heath Avantis, Allen & Heath dLive
Number of Channels
128
Inputs
Ethernet (3 x)
Type-A Connector
RJ45
Made in
China
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
