- Тype: Active
- Power: 1500 W
- Woofer: 12"
- Tweeter: 1"
EAW RS121 Active Loudspeaker
This 2-way self-powered loudspeaker is built around a 12" woofer and 1.4" compression driver, delivering EAW's signature touring-grade sound in a portable wooden enclosure. Onboard 1500W Class D bi-amplification, EAW Focusing DSP, and DynO dynamic processing give it the clarity and headroom needed for live stages, houses of worship, and corporate AV. A rotatable MK-inspired constant-directivity horn provides controlled 90° × 60° coverage, while the M20 pole-mount socket and M10 suspension points make deployment flexible for FOH or floor-monitor use.
- 12" LF cone with 2.5" voice coil paired with 1" exit / 1.4" voice coil HF compression driver for full-range response from 47 Hz to 20 kHz
- Onboard 1500W Class D bi-amplification with EAW Focusing and DynO DSP for clean, accurate sound at peaks up to 135 dB SPL
- User-rotatable 90° horizontal × 60° vertical constant-directivity horn derived from EAW's legendary MK Series
- Balanced XLR/TRS input with XLR loop-through, IEC mains connector, M20 pole-mount socket, and M10 threaded suspension points
EAW RS121 — Touring-Grade 2-Way Self-Powered Loudspeaker
The EAW RS121 brings EAW's professional loudspeaker engineering into a portable wooden enclosure for live stages, rental houses, and installed AV. A 12" cone with a 2.5" voice coil pairs with a 1" exit, 1.4" voice coil compression driver on a constant-directivity horn, delivering full-range response from 47 Hz to 20 kHz. Built-in 1500W Class D bi-amplification drives each section independently, while EAW Focusing and DynO DSP correct phase and manage dynamics in real time. This model suits sound professionals who need a self-powered box for FOH or monitoring without external processing.
What Sets the RS121 Apart
EAW Focusing eliminates the phase anomalies that colour typical two-way designs, producing cleaner vocal and instrument reproduction, while DynO dynamic optimisation manages amplifier headroom to keep peaks under control. The rotatable MK-inspired horn — first proven in EAW's stadium-grade MK Series — gives operators a switchable 90° horizontal × 60° vertical coverage pattern for wide FOH throw or tight stage-wedge monitoring. High SPL, broad frequency response, and bi-amped headroom mean the cabinet covers small-to-medium venues solo or pairs with RS118 / RS115 subwoofers for full-bandwidth systems.
Technical Specifications
- Frequency Range: 47 Hz – 20 kHz — full-range response from sub-bass fundamentals to high-frequency detail
- Max SPL: 135 dB — headroom for live bands, DJ rigs, and high-SPL corporate events
- Transducers & Amplification: 12" cone (2.5" VC) LF + 1" exit / 1.4" VC compression driver HF, 1500W Class D bi-amped — independent power paths with EAW Focusing and DynO DSP
- Beamwidth, Inputs & Deployment: 90° H × 60° V rotatable horn, balanced XLR/TRS with XLR loop-through, M20 pole-mount socket, M10 suspension points — switchable pattern for FOH, floor-wedge, or flown use
Who the EAW RS121 Is Built For
The EAW RS121 is the right choice for live sound professionals, rental houses, and AV installers who need a flexible self-powered 12" cabinet that moves between roles without re-patching. Touring bands and mobile DJs will appreciate the 135 dB peak SPL and the M20 pole-mount socket, which lets the box sit securely above an RS118 or RS115 sub. Houses of worship, theatres, and corporate AV teams benefit from the rotatable horn pattern and EAW Focusing DSP, which keeps spoken word intelligible at lower volumes. A Main / Monitor mode switch on the amplifier recalls a floor-wedge preset for maximum gain-before-feedback, so the same cabinet doubles as a stage monitor.
EAW and the RS Series Heritage
Eastern Acoustic Works has designed professional loudspeakers since 1978, and the RS Series draws directly on that legacy. The constant-directivity horn geometry in this model was first proven in EAW's legendary MK Series — a line born from the audio demands of stadium-scale installations worldwide. Resolution, EAW's proprietary simulation software, lets system designers predict the performance of one or multiple RS Series enclosures within a venue before deployment.
Frequency Range: 47 Hz - 20 kHz
The frequency response 47 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 135 dB
High SPL levels up to 135 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Woofer: 12"
Thanks to 12" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Bi-Amp
Yes
Multifunctional Housing
Yes
Pole Mount
M20
Speakers
1x 12 "
DSP
Controls
Level
LAN
No
Bluetooth
No
WiFi
No
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
No
Colour
Black
Crossover Frequency (kHz)
1
Bandwidth
2 Bandwidth
Housing
Plywood Housing
Inputs
USB
No
Outputs
XLR Thru
MP3 / Line In
No
Memory Card Slot
No
AUX IN
No
Microphone Input
Yes
Battery Operation
No
Power Supply
IEC
Batteries Included
No
Power Consumption
200 W
Mounting
Eye Bolt for Suspension, M20
UK/EU Power supply included
No
Diameter (inch)
12
Diameter
12"
Height (cm)
65.8
Width (cm)
36.8
Depth (cm)
38.1
Net Weight (kg)
19
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
