Eurolite 2700 DMX Strobe
The Eurolite DMX Superstrobe 2700 is a high-power xenon strobe built for stages, clubs, dance schools and rental fleets, drawing 1500 W from a pre-installed flash tube. Two DMX channels tune intensity (0–100 %) and flash rate (1–12 per second), with a stand-alone mode for simpler rigs. The wide reflector fills a room from one rig point while passive convection cooling keeps noise to a Class 1 minimum.
- Pre-installed 1500 W xenon flash tube plus colour filter frame for tinted washes.
- Wide-angle reflector covers a large dance floor from one or two units.
- 2-channel DMX plus stand-alone control fits any lighting desk or bare-bones rig.
- Passive convection cooling with a Class 1 noise rating for theatres and small venues.
1500 W DMX strobe for clubs, stages and rental fleets
The Eurolite DMX Superstrobe 2700 fires cold-white xenon pulses from a fitted 1500 W flash tube, with a wide reflector that fills a dance floor from a single rig point. Two DMX channels patch from a lighting desk — channel 1 for intensity (0–100 %), channel 2 for flash rate (1–12 per second) — while rear-panel controls handle stand-alone use without a controller.
What separates this strobe from budget club units
Where entry-level strobes ship with bare lamp housings, this model arrives with the flash tube pre-installed and a colour filter frame mounted in front of the reflector, so tinted gels drop in without modification. Silent passive convection cooling earns a Class 1 noise rating suitable for theatres.
Flash output parameters
Flash tube output and power supply ratings determine how hard the strobe hits and how fast it pulses — the parameters operators feel during a live show.
- Power Consumption: 1500 W — drives cold-white pulses through club ambient light.
- Flash Rate: 1–12 flashes per second — covers slow dramatic pulses to fast chase chains.
- The electronic dimmer sweeps the full 0–100 % intensity range, with control from DMX channel 1 or the rear panel when a fast on-the-fly tweak is what the show needs.
DMX connectivity and control
Two channels and standard 3-pin XLR connectors make patching the strobe into an existing rig straightforward.
- DMX Channels: 2 — channel 1 intensity, channel 2 flash rate.
- DMX Connectors: 3-pin XLR (M) input, 3-pin XLR (F) output for daisy-chasing multiple strobes in chase effects.
- Pair the strobe with stand-alone presets, a DMX console, Eurosoft LED PC-Control 512 or the Light Captain app — every tier of operator finds a familiar workflow without adapters.
Mechanical build and installation
The compact metal chassis and included mounting bracket suit both touring rigs and permanent installs.
- Dimensions: 460 x 240 x 140 mm — flat profile slides onto T-bar stands and truss.
- Weight: 3.11 kg
- Housing & Cooling: 1.5 mm black matte metal, passive convection cooling
- An attached Approx. 1 m H05VV-F cable carries 230 V AC at 50 Hz directly from the wall — no external transformer needed on touring rigs.
Power Supply
240V
UK/EU Power supply included
Weight
3,05 kg
Made in
China
Documents
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
