Light4Me ORBEAM 150W LED Beam

Light4Me ORBEAM 150W LED — Compact Beam Moving Head for Stage and Club

The Light4Me ORBEAM 150W LED is a professional beam moving head designed for lighting designers, mobile DJs, and rental crews who need a focused, high-intensity aerial beam in a compact housing. Built around a single 150W white LED source and a narrow 2.1° optical system, this fixture produces a tight, concentrated column of light that reads clearly through haze and fog on mid-sized stages. The ORBEAM 150W LED is the right choice for operators who want beam-style impact without stepping up to a discharge-lamp fixture.

What Sets the ORBEAM Apart in the Beam Category

Two design choices separate this fixture from entry-level beam heads in the same price tier. First, the dual-wheel optical system pairs an 11-color dichroic wheel (with 10 half-colors and a rainbow effect) against a static gobo wheel carrying 14 patterns plus Gobo Shake and bidirectional Gobo Scroll. Second, the rotating 6+12-facet prism with adjustable rotation speed multiplies a single beam into layered aerial shapes, giving operators a wider vocabulary of looks from a single 150W source.

Light Source and Optical Performance

The 150W white LED engine is paired with precision optics that deliver a 2.1° beam angle, producing the tight, pencil-like column that beam-style fixtures are known for. A linear 0–100% dimmer allows smooth intensity fades, while the electronic strobe runs from 0 to 25 Hz with adjustable frequency for punchy club-style flashes. The fixture is rated for indoor use with an IP20 protection class and relies on active fan cooling to keep the LED engine stable during long shows.

• Light Source: 150W white LED — single high-output emitter for a clean, focused beam
• Beam Angle: 2.1° — narrow aperture that throws a sharp, visible column through haze
• Dimmer: 0–100% linear — smooth fades from blackout to full output
• Strobe: 0–25 Hz, adjustable — covers slow pulses through fast club-rate flashes

Movement, Color, and Gobo System

Pan covers a full 540° and tilt reaches 270°, both with Pan/Tilt Fine resolution and reversible direction, so programmers can build smooth sweeps and precise repositioning into cue lists. The color wheel offers 11 dichroic filters plus open, 10 half-color positions, and a rainbow effect, while the static gobo wheel holds 14 patterns plus open with Gobo Shake and bidirectional Gobo Scroll at variable speed. A rotating 6+12-facet prism with adjustable rotation speed splits the beam into multi-layered shapes for aerial effects.

• Pan / Tilt Range: 540° / 270° with Pan/Tilt Fine and reversible direction
• Color Wheel: 11 colors + open, 10 half-colors, rainbow effect, bidirectional Color Scroll
• Gobo Wheel: 14 static patterns + open, Gobo Shake, bidirectional Gobo Scroll
• Prism: 6+12-facet rotating prism with adjustable rotation speed

Control, Connectivity, and Build

Operators can drive the fixture through 13 DMX channels, run it in automatic programs, trigger it from music via the sound-active mode with adjustable microphone sensitivity, or chain multiple units in master/slave configuration. The rear panel carries 3-pin XLR DMX in/out and a PowerCON A (NAC3FCA) power input, while the front-facing LED display with four buttons supports display flip and backlight control for rigging at any orientation. The polyamide housing measures 24.5 × 17.5 × 27 cm and weighs 6.25 kg net, with a powder-coated iron omega mounting bracket included for truss attachment.

• DMX Channels: 13 channels — full parameter control over pan, tilt, color, gobo, prism, dimmer, and strobe
• Operating Modes: DMX512, Auto, Sound Active, Master/Slave — covers programmed shows and plug-and-play setups
• DMX Connectors: 3-pin XLR male in / female out — standard professional rigging
• Power: AC 100–240 V, 50/60 Hz, 200 W consumption — universal mains input for touring
• Housing: Polyamide body, 6.25 kg net, 24.5 × 17.5 × 27 cm with powder-coated iron omega bracket

Who the Light4Me ORBEAM 150W LED Is Built For

The Light4Me ORBEAM 150W LED is the right choice for mobile DJs, small-to-mid venue lighting operators, and rental companies who need a reliable beam fixture that travels well and programs cleanly. Its 6.25 kg weight and compact 24.5 × 17.5 × 27 cm footprint make it easy to mount on truss or lighting stands at clubs, wedding venues, corporate events, and mid-sized concert stages. Sound-active mode with adjustable microphone sensitivity also makes it a practical option for operators who run shows without a dedicated lighting desk.

Light4Me and the ORBEAM Line

Light4Me is a lighting brand distributed across European stage and event retailers, with a catalog that spans beam, spot, wash, and effect fixtures aimed at the working DJ and rental market. The ORBEAM series sits in the brand's beam-moving-head range, positioned as an LED-based alternative to discharge-lamp beam fixtures for operators who want lower maintenance and instant-on operation. The 150W LED variant represents the entry point of the ORBEAM family, sharing the same control architecture and connector layout found across the line.