Choose country for shipment delivery

New

Mackie Thrash 12v2 Active Loudspeaker

Product code: 1327857

New
Mackie Thrash 12v2 Active Loudspeaker

Product code: 1327857

This product cannot be delivered to your country at the moment.
Based on your order, we will try to restock the goods and contact you with a delivery date. If you don't want to wait, check alternative products (4).
Active Loudspeaker Mackie Thrash 12v2 Active Loudspeaker

Mackie Thrash 12v2 Active Loudspeaker

US$336
The Mackie Thrash 12v2 is a 12-inch powered loudspeaker built for musicians, DJs and small-venue performers who need serious volume without a complicated setup. Class D amplification delivers 1300 W of peak power, while integrated DSP with four voicing modes and a Feedback Eliminator keeps the sound clean at any level. Bluetooth streaming and…
  • Тype: 2 Bandwidth
  • Power: 1300 W
  • Woofer: 12"
  • Tweeter: 1"
  • Crossover Frequency: 2 kHz

Mackie Thrash 12v2 Active Loudspeaker

The Mackie Thrash 12v2 is a 12-inch powered loudspeaker built for musicians, DJs and small-venue performers who need serious volume without a complicated setup. Class D amplification delivers 1300 W of peak power, while integrated DSP with four voicing modes and a Feedback Eliminator keeps the sound clean at any level. Bluetooth streaming and stereo linking cut cable clutter, and the rugged frame with metal handles makes transport painless.

  • 1300 W Class D amplifier pushing 129 dB max SPL for loud vocals and driving guitar tones
  • Four voicing modes — Flat, DJ, Live and Wedge — adapt the response to any role on stage
  • Bluetooth wireless streaming plus the ability to link two cabinets in stereo or dual mono
  • Single XLR/TRS combo input with mic/line switch, plus XLR mix output for daisy-chaining

Raw Power for the Working Performer

The Mackie Thrash 12v2 is a 12-inch powered loudspeaker built to put serious volume within reach of anyone stepping into live audio. A Class D amplifier pushes 1300 W of peak power to reach 129 dB max SPL — enough headroom to cut through screaming guitars and driving vocals in rehearsal rooms, small clubs and outdoor events. The 12-inch woofer and 1-inch compression tweeter cover 45 Hz to 18 kHz for full-range response that handles bass, vocals and cymbals without compromise.

Smart DSP and Wireless Connectivity

What separates this model from bare-bones budget cabinets is its built-in processing. Four voicing modes — Flat, DJ, Live and Wedge — re-tune the response at the press of a button, so the same speaker works as a front-of-house PA, a DJ rig or a floor wedge. The Feedback Eliminator suppresses the ear-piercing squeal when a mic gets too close to the cabinet. Bluetooth streaming lets a phone or laptop feed audio wirelessly, and two units can be linked for true stereo or dual-mono playback without extra cables.

Technical Specifications

Every parameter below is engineered to keep setup fast and the sound dependable night after night.

  • Amplifier Power: 1300 W Class D — peak headroom for vocals and instruments in small-to-medium venues
  • Max SPL: 129 dB — headroom for loud vocals and full-band music
  • Frequency Range: 45 Hz – 18 kHz — full-range response covering bass, vocals and cymbals
  • Drivers: 12-inch woofer + 1-inch compression tweeter — two-way bi-amped configuration
  • Inputs: 1 × XLR/TRS combo + Bluetooth — plus XLR Mix Out for daisy-chaining
  • Voicing Modes: Flat, DJ, Live, Wedge — onboard DSP adapts the response to the role

Who This Speaker Is Built For

This model is aimed at first-time PA buyers, solo performers, mobile DJs and small-event hosts who want loud, dependable sound without paying for features they will never use. Its single XLR/TRS combo input covers both microphone and line-level sources, so plugging in a mixer, a vocal mic or an instrument is a one-cable job. The Bluetooth input makes it equally useful for backyard parties and wedding receptions where a phone or laptop is the only source. For performers who also need stage monitoring, the wedge-mode voicing and multifunctional cabinet let the same speaker pull double duty as a floor monitor. The Mackie Thrash 12v2 is the right choice for entry-level artists who need a single rugged cabinet that can handle PA, monitor and wireless playback duties.

Frequency Range

Frequency Range: 45 Hz - 18 kHz

The frequency response 45 Hz - 18 kHz provides a wide enough range to capture all the fine musical and sonic details.

Sound Pressure Level (SPL)

Sound Pressure Level (SPL): 129 dB

High SPL levels up to 129 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.

Bi-Amp

Bi-Amp: Yes

Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.

Pole Mount

Pole Mount: Yes

The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.

Bluetooth: Yes

Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.

Microphone Input: Yes

The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.

Suitability

Тype

2 Bandwidth

Features

Bi-Amp

Yes

Multifunctional Housing

Yes

Pole Mount

Yes

DSP

Yes

Controls

Gain, Level, Mic/Line Switch, Bluetooth Pairing Button, Voicing, Feedback Eliminator

LAN

No

Bluetooth

Yes

Microphone

No

Properties

Power (Watt)

1300

Power

1300 W

Frequency Range

45 Hz - 18 kHz

Woofer

12"

Middle Speaker

None

Tweeter

1"

Crossover Frequency (kHz)

2

Crossover Frequency

2 kHz

Bandwidth

2 Bandwidth

Inputs and Outputs

Inputs

XLR/TRS kombi

Outputs

Balanced XLR M

Microphone Input

Yes

Acoustics

Power RMS (Watt)

500

Power RMS

500 W

Sound Pressure Level - SPL (dB)

129

Sound Pressure Level (SPL)

129 dB

Power supply

Battery Operation

No

Power Supply

100V - 240V

Power Consumption

300 W

Accessory

UK/EU Power supply included

No

Dimensions and Weight

Diameter (inch)

12

Diameter

12"

Height (cm)

61.4

Width (cm)

35.3

Depth (cm)

34.8

Net Weight (kg)

13.9

Weight

13,9 kg

Country

Made in

China

Documents

Instructions for use
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.