Choose country for shipment delivery

Shopping Cart

Your shopping cart is empty

Palmer Y-BOX Splitter

4.55

Product code: 242324 (PGA03)

Palmer Y-BOX Splitter

4.55

Product code: 242324 (PGA03)

US$199
In stock at the supplier
Order today, we will deliver within 3 weeks
Based on your order, we will try to restock the goods and contact you with a delivery date. If you don't want to wait, check alternative products (3).
Splitter Palmer Y-BOX Splitter

Palmer Y-BOX Splitter

US$199
Splitter effect. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. Can also be used as a line driver for long cable runs and features a phase reverse switch for the AMP 2 output when using...

Palmer Y-BOX Splitter

Splitter effect. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. Can also be used as a line driver for long cable runs and features a phase reverse switch for the AMP 2 output when using pre-amps. Robust steel housing. Dimensions: 120x 80x 45mm. Weight: 0,58 kg

Product type:                                    Splitters
Split type:                                          1 in 2
Inputs:                                               1
Input connectors:                              6.3 mm Jack
Adjustable input:                               no
Number of split-outputs per canal:    1
Output connectors:                           6.3 mm Jack
THRU outputs/channel:                     1
Transformer isolated outputs:           yes
Adjustable output:                             no
Controls:                                           ground lift, phase
Indicators:                                         Power
Operating voltage:                            9 V block, 9 V DC power supply
Width:                                               125 mm
Depth:                                               80 mm
Height:                                              45 mm
Cabinet material:                               sheet steel
Cabinet surface:                                powder coated
Weight:                                             0.58 kg   

Suitability
Power supply

Battery Operation

Yes

Accessory

UK/EU Power supply included

No

Country

Made in

Germany

4.55 / 5

Based on the number of reviews: 3

5 3
4 0
3 0
2 0
1 0

All reviews come from verified customers who have purchased a product from us in the past.

M

Milan H.

cz Flag

Czech Republic

02/09/2025

Původně jsem hledal něco na splitnutí signálu od Radialu, ale ztratil jsem se v nabídce produktů a přehledu parametrů. Nakonec jsem z vyčerpání zakoupil tento výrobek, u kterého jsem nabyl celkem jasné představy, jak funguje. Musím říct, že z celkového provedení jsem velmi mile překvapen. Bytelná konstrukce, vychytaný šuplík na baterii bez nutnosti připínání kontaktů (baterie se při zasunutí šuplíku opře o kontakty). Dlouho jsem testoval, jestli při dělení signálu nedochází ke ztrátě či zkreslení signálu, ale nebyl jsem schopen poznat rozdíl při průchodu krabičkou. Kontrolka je orientační, svítí jen při stisku tlačítka, takže nežere zdroj / baterku. Tahle krabka rozhodně za ty peníze stojí.

Automated translation

This review cannot be translated.
H

Heureka.cz

cz Flag

Czech Republic

05/22/2022

Doporučuje produkt

Možná blbě googlím, ale takových "gadgetů" (za tyhle peníze) na trhu není moc. Bojoval jsem s brumem zemnění poměrně dlouho, vyzkoušel pár AYB přepínaču, zkoušel odstřihávat "ground" z audio kabelů, zapojoval DI-boxy skrze XLR kabely... tohle bylo přímo na "ono toto" a vyřešilo se to 100% ihned po zapojení.

Plusy: Velmi specifická záležitost, nežere signál jako laciné DI boxy, ground lift, přepínání fáze. Pokud jste někdy zkoušeli hrát skrze dva kytarové aparáty... víte o čem je řeč. Takových Made in Germany

Mínusy: Nevím proč mě nesvítí power LED. Píší 9-18V .. mám to na 9V tak jestli to je " podkrmené ? " funguje to super, tak jak má ... jen to nesvíti?

Recommends product

Maybe I'm googling badly, but there aren't many such "gadgets" on the market (for this money). I've been struggling with ground hum for quite a while, tried a few AYB switches, tried cutting the "ground" from audio cables, connected DI-boxes through XLR cables... this was right on the mark and it was 100% solved immediately after connecting.

Pros: Very specific, doesn't eat the signal like cheap DI boxes, ground lift, phase switching. If you've ever tried playing through two guitar amps... you know what I'm talking about. Made in Germany

Cons: I don't know why my power LED doesn't light up. It says 9-18V.. I have it on 9V so if it's "underfed?" it works great, as it should... it just doesn't light up?

Automated translation

This review cannot be translated.
C

Customer

cz Flag

Czech Republic

08/11/2017

Jsem velmi spokojený

Automated translation

This review cannot be translated.

Documents

Instructions for use
Manufacturer information
Manufacturer:
Adam Hall
Adam-Hall-Str. 1, 61267, Neu-Anspach, Germany
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.