Albania
Argentina
Australia
Austria
Belgium
Bosnia and Herzegovina
Brazil
Bulgaria
Canada
Chile
Colombia
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Mexico
Moldova
Montenegro
Netherlands
New Zealand
North Macedonia
Norway
Philippines
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
Turkey
Ukraine
United Kingdom
United States of America
- Length: 10 m
- Type-A Connector: Speakon
- Type-B Connector: Speakon
- Connector Angle: Straight - Straight
Revoltage SC008 10M 10 m Speaker Cable
The Revoltage SC008 10M is a 10-meter ready-made speaker cable fitted with Speakon connectors on both ends, designed to link power amplifiers to passive loudspeakers in live rigs and installed PA systems. The straight-to-straight Speakon pairing locks securely into compatible speaker outputs, providing a stable, vibration-resistant connection that won't pull loose mid-set. With its 10 m reach, this cable suits small-to-medium stage setups, rehearsal rooms, and fixed installations where a clean, dependable run between amp and cabinet is required.
- 10 m length — enough reach for typical stage amp-to-speaker runs without excess slack
- Speakon-to-Speakon connectors — locking, professional-grade speaker termination
- Straight-to-straight connector angle — direct fit for rear-panel amp and speaker inputs
- Ready-made cable — no soldering or connector assembly required out of the box
- 99.9 % OFC conductors, flexible RoHS PVC jacket, Speakon connectors with copper pins
Reliable Speakon Speaker Cable for Stage and PA
The Revoltage SC008 10M is a 10-meter ready-made speaker cable for connecting power amplifiers to passive loudspeakers. Both ends terminate in Speakon connectors — the locking professional standard used across live-sound gear — so the cable clicks firmly into compatible amp outputs and speaker inputs without pulling free mid-performance. The straight-to-straight connector orientation keeps the cable flush against rear-panel sockets, ideal for rack-mounted amps and standard cabinets where space behind the gear is limited.
Ready to Plug In
At 10 m, this lead covers the typical run between a stage-side amp and a speaker stack, or between an amp rack and a wall-mounted cabinet in a small venue. Pre-assembled Speakon terminations remove the need for soldering, so the cable is ready straight from the box for rehearsal rooms, small gigs, and fixed installs.
Cable and Connectors
The Revoltage SC008 10M is a low-noise speaker cable for connecting an amplifier to a speaker. Its 99.9 % oxygen-free copper (OFC) conductors carry the amplifier signal faithfully, and the super-flexible jacket made from RoHS-compliant PVC stays supple when coiling and uncoiling at every gig. Both ends carry heavy-duty Speakon connectors with copper pins for a solid, low-resistance contact.
- Conductors: OFC, 99.9 %
- Jacket: flexible PVC, RoHS compliant
- Connectors: Speakon, copper pins
Microphone Input
Length
10 m
Made in
China
Documents
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
