Albania
Argentina
Australia
Austria
Belgium
Bosnia and Herzegovina
Brazil
Bulgaria
Canada
Chile
Colombia
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Mexico
Moldova
Montenegro
Netherlands
New Zealand
North Macedonia
Norway
Philippines
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
Turkey
Ukraine
United Kingdom
United States of America
Loudspeaker Cables
A speaker cable carries a power signal from an amplifier to a speaker cabinet, so its construction differs from an instrument or microphone cable. It does not have shielding designed for low-level signals, but sufficiently thick conductors that can handle higher current. When choosing, focus mainly on length, conductor cross-section and the connectors at both ends to ensure they fit both your amplifier and speaker cabinet.
Do not use an instrument cable instead of a speaker cable
They may look similar on the outside, especially when they have the same jack connectors, but an instrument cable is designed for a low-level signal. On a power output, it may be too thin, overheat and reduce transmission quality. If you need to connect a guitar and pedal, choose instrument cables; a speaker cable belongs between the amplifier output and speaker cabinet. Audio cables carry signals between studio equipment.
Length, cross-section and connectors
| Parameter | What to check |
|---|---|
| Length | The range includes shorter models of around one metre as well as long cables of up to fifteen metres or more; choose the length according to the distance, without unnecessary extra slack, because cable resistance increases with length |
| Conductor cross-section | A thicker conductor handles higher power and longer runs better; compare the manufacturer's specifications |
| Connectors | Most commonly TS jack, while Speakon is also often used; check which sockets your amplifier and speaker cabinet have |
| Use | A durable design is useful on stage and in the rehearsal room, while fixed installations primarily require the right cross-section and length |
What to check before choosing
- Which connector type the amplifier and speaker cabinet have.
- Which cable length suits you without unnecessary extra slack.
- Whether the cable is designed for a speaker output, not an instrument signal.
- The conductor cross-section for the power and distance.
- The durability of the jacket if you frequently coil and transport the cable.
For long runs, also consider handling. A cable that is too stiff is difficult to coil and more likely to become damaged, so choose a more flexible jacket if you will transport it frequently. For fixed installations, focus on the durability of the insulation and the routing method.
You can find a wider selection in the ready-made cables category. If you need several signal lines in one, take a look at multicore cables, and if you are looking for a cable with another purpose, browse other cables.
